Image
Product code
Description
Manufacturer
Manufacturer code
Stock
Price
QTY
Control Box M1
Application: The distribution bus is intended for use in control boxes for controlling heating systems, by facilitating the connection of electric actuators and similar control devices, such as different types of room thermostats, controllers, etc. It is particularly suitable for controlling underfloor heating circuits. Through the distribution bus, it is possible to control a circulation pump, a heating boiler, up to 9 heating circuits. Two valve actuators can be connected to each circuit. Each of the two modules can work independently. Technical data: Supply voltage: 230V/50Hz Inputs for control devices: 9 Outputs for use of actuators for valves: 9 (230V/50Hz) Output for circulation pump: 230V/50Hz Boiler control output: independent contact (NO/NC) LED status indication for outputs Ambient temperature: 5 to 40°С Relative humidity of environment: up to 80% СDegree of protection:
935.4 KB
INTIEL
M1
3
pc
| 1+ | 185.00 BGN |
Control Box M2
Application: The distribution bus is intended for use in control boxes for controlling heating systems, by facilitating the connection of electric actuators and similar control devices, such as different types of room thermostats, controllers, etc. It is particularly suitable for controlling underfloor heating circuits. Through the distribution bus, it is possible to control a circulation pump, a heating boiler, up to 9 heating circuits. Two valve actuators can be connected to each circuit. Each of the two modules can work independently. Technical data: Supply voltage: 230V/50Hz Inputs for control devices: 9 Outputs for use of actuators for valves: 9 (230V/50Hz) Output for circulation pump: 230V/50Hz Boiler control output: independent contact (NO/NC) LED status indication for outputs Ambient temperature: 5 to 40°С Relative humidity of environment: up to 80% СDegree of protection:
935.4 KB
INTIEL
M2
3
pc
| 1+ | 139.00 BGN |
Controller for accumulation tanks
Application: The controller is designed to manage the heating of an accumulating tank in a central heating system, thus providing a smooth operation of the boiler, decreasing the number of its starts and stops. It manages directly the operation of a circulation pump between the boiler and the accumulation tank, as well it sends a signal for a boiler start and stop, and measures the temperatures at the top and lower part of the accumulation tank. Technical data: Manage operation of the circulation pump between the boiler and the accumulation tank Sends a signal for start and stop at the boiler Equipped with two temperature sensors Pt1000 (-50° up to +200°C) Monitoring of the following parameters: set and actual temperature at the top of the buffer. set and actual temperature at the bottom of the buffer. Temperature range of regulation from 0 °C up to 100 °C. Outputs – two relay / nominal current – 3A/~250V. output pump ~ 220V/50Hz output for start and stop the boiler Digital settings of main operation parameters. Possibility to lock the settings menu. Custom LED indication. “STOP”
754.79 KB
INTIEL
INT0129-2
3
pc
| 1+ | 223.00 BGN |
Controller for ventilation and air-conditioning systems VENTOCONTROL-N
Application: The Controller is designed to manage a ventilation system with air-conditioned air, regulating the temperature in the inlet duct and the temperature in the air-conditioned premises. It provides alternate usage of the system for heating or cooling, according to a command received by a controller settings or proportional regulator. Technical data: Regulates water cooling and water heating sections equipped with mixed valves and actuators, a thermostat against freezing, an electrical heating section with an emergency thermostat against overheating and air-flow availability element. Regulates inlet and outlet dampers equipped with actuators, a pressure and suction fans with asynchronous motors. Equipped with a heating capacity proportional regulator. Equipped with a three sectional digital display showing the different temperature levels. Controls an additional stage module for heating sections. Controls the power supply module of three way valves actuators. Controls one or more than one revolution regulators by switching them. Controls the room temperature by a separate room thermoregulator. Protection against freezing. Protection against overheating. Fire
576.72 KB
INTIEL
VENTOCONTROL-N
0
pc
| 1+ | 388.00 BGN |
Dynamic boiler controller
Application: The Dynamic Boiler Controller is very suitable for water heating installations in family houses, small and large projects. It is designed to provide the desired heating comfort, optimizing the fuel consumption by a control of the boiler operation. In fact it is able to manage the operation of solid fuel, light fuel and gas boilers and as well the consumption of a heating energy from accumulating reservoirs or other central heating sources. Technical data: Controls the operation of solid fuel, light fuel or gas boilers. Can regulate the operation of the heating system in relation to the internal temperature of the heating system. Controls the heating system in compliance with: the outlet boiler temperature; the inlet boiler temperature of the return water; the water temperature in the heating circuit after the mixed four-way valve; the temperature in the domestic hot water circuit; the outdoor temperature; the room temperature by a room thermostats. Stops the boiler operation by a signal from the built-in working boiler thermostat, when the maximum working temperature exceeds (+75 °C)-(+90 °C). Opens the mixed four way valve, starts the circulation pump and stops the boiler if the outgoing boiler temperature exceeds its factory settings of (+95 °C)-(+105 °C). Closes the mixed four way valve and start the boiler operation by force (only in winter regime) if the return boiler water is lower than the fixed one of (+45 °C)-(+65 °C). Opens the mixed four way valve and starts by force the boiler operation if the water temperature after the mixed valve is lower than the adjusted one. The operation threshold will be changed automatically by the outdoor temperature and outdoor thermostat. If a room thermostat is not mounted this function can be used for a central equithermal temperature regulation of the water heating in multi-circuit systems and large projects. Opens the mixed valve, starts the circulation pump and stops the
1.1 MB
INTIEL
INT0135
3
pc
| 1+ | 695.00 BGN |
Four channel controller for mixing valves INT0129-4
Application: The device is designed to control motor actuators for mixing valves, according to temperature, which is supplied to the rooms build by the mixing circuit. It is possible to control three two-position motor actuator and one analog motor actuator from 0 to 10 V. Suitable for buildings where there are one to four heating circuits , like: underfloor heating, radiator heating and prepare domestic hot water. Technical data: The heating water assignation is able to be adjusted in one of the following ways: independently (manually by the controller), by means of outdoor temperature or room thermo regulator. Room thermostats have to a contact output. Control four heatings circuit : three two-position motor actuators; one proportional motor actuator with analog output 0 – 10 V; The following limitations are to be fixed concerning the heating water: Minimum temperature; Maximum temperature; Minimum return water temperature Pump operation: if the heating water is within the fixed range for the minimum and maximum temperature operation by force in case the heating water temperature is less than 10 °С provide an overheating function of the circuit in case the heating water temperature exceeds its assigned level with 10 °С stops the circulation pump in case the temperature of the heating water is less than its minimum assigned level for period of 1 hour. After that the controller goes into test mode in which it starts the circulation pump for 5 minutes every 15 minutes. This mode continues until the heating water exceeds the assignation about its minimum temperature. Built-in weekly programmer. Equipped with six temperature sensors
605.17 KB
INTIEL
INT0129-4
3
pc
| 1+ | 520.00 BGN |
Heating circuits controller INT0129
Application: The device is designed to control motor actuators of mixed valves, in accordance with the water temperature directed to the heating system. It can be used also to keep the temperature in buffers or water tanks heated by a boiler by means of a mixed valve. Technical data: The heating water assignation is able to be adjusted in one of the following ways: independently (manually by the controller), by means of outdoor temperature or room thermo regulator Suitable room thermo regulator are contatct or analogue ones, as the analogue output can be 0(4) – 20 mA or 0 – 10V Suitable motor actuators are two way or proportional ones with a control signal of 0 – 10V The following limitations are to be fixed concerning the heating water: Minimum temperature; Maximum temperature; Minimum return water temperature Pump operation: if the heating water is within the fixed range for the minimum and maximum temperature operation by force in case the heating water temperature is less than 10 °С provide an overheating function of the circuit in case the heating water temperature exceeds its assigned level with 10 °С stops the circulation pump in case the temperature of the heating water is less than its minimum assigned level for period of 1 hour. After that the controller goes into test mode in which it starts the circulation pump for 5 minutes every 15 minutes. This mode continues until the heating water exceeds the assignation about its minimum temperature. Equipped with three temperature sensors
719.53 KB
INTIEL
INT0129
3
pc
| 1+ | 348.00 BGN |
Motor Controller 218PT , photo sensor, 2RC
Operating Voltage: 220VAC;
Power: 1000W;
Bandwidth /Hz/: 433.92MHz;
Time Delay: 1~240sec;
Operating Distance: 50m;
Code type: Fixed;
Number of RC (different codes): 42;
106.78 KB
WRLS1 F1 SAW433.92 xxx PT42
2
pc
| 1+ | 136.00 BGN |
| 2+ | 127.00 BGN |
| 3+ | 119.00 BGN |
| 5+ | 113.00 BGN |
| view more | |
Motor Controller RC, 433.92 MHz, 12-30V AC/DC
Operating Voltage: 12~30VAC/VDC;
Output Current: 15A/24VDC/120VAC;
Bandwidth /Hz/: 433.92MHz;
Time Delay: 0.25sec;
Operating Distance: 50m;
Code type: Fixed;
Number of RC (same code): unlimited;
Number of RC (different codes): 255;
107.15 KB
RCV2 M1 24 pt 255
2
pc
| 1+ | 84.70 BGN |
| 3+ | 77.70 BGN |
| 5+ | 71.70 BGN |
| 10+ | 66.70 BGN |
| view more | |
Motor Controller RC, 433.92 MHz, 12-30V AC/DC, hopping code
Operating Voltage: 12~30VAC/VDC;
Output Current: 15A/24VDC/120VAC;
Bandwidth /Hz/: 433.92MHz;
Time Delay: 0.25sec;
Operating Distance: 50m;
Code type: hoping code;
Number of RC (different codes): 204;
287.02 KB
RCV2 F1 SAW433.92 HCS204
0
pc
| 1+ | 86.50 BGN |
| 3+ | 79.30 BGN |
| 5+ | 73.20 BGN |
| 10+ | 68.00 BGN |
| view more | |
Motor Controller RC, one channel
Operating Voltage: 10~16VDC;
Output Current: 15A/24VDC/120VAC-10A/250VAC;
Bandwidth /Hz/: 430MHz;
Code type: Fixed;
Number of RC (same code): unlimited;
Number of RC (different codes): 30;
85.37 KB
M1 LF6 xxx PT
4
pc
| 1+ | 43.90 BGN |
| 3+ | 40.20 BGN |
| 5+ | 37.10 BGN |
| 10+ | 34.50 BGN |
| view more | |
Motor Controller RC, one channel, 433.92 MHz
Operating Voltage: 10~16VDC;
Output Current: 15A/24VDC/120VAC;
Bandwidth /Hz/: 433.92MHz;
Code type: Fixed;
Number of RC (different codes): 30;
140.28 KB
M1 SAW433,92MHzF6 xxx PT
7
pc
| 1+ | 43.90 BGN |
| 3+ | 40.20 BGN |
| 5+ | 37.10 BGN |
| 10+ | 34.50 BGN |
| view more | |
Motor Controller RC, one channel, 433.92 MHz, hopping code
Operating Voltage: 10~16VDC;
Output Current: 15A/24VDC/120VAC;
Bandwidth /Hz/: 433.92MHz;
Code type: hoping code;
Number of RC (memory capacity): 24;
124.85 KB
M1 SAW433,92MHzHC6 xxx 301
3
pc
| 1+ | 57.00 BGN |
| 3+ | 52.30 BGN |
| 5+ | 48.40 BGN |
| 10+ | 45.00 BGN |
| view more | |
Motor Controller RC, one channel, hopping code
Operating Voltage: 10~16VDC;
Output Current: 15A/24VDC/120VAC-10A/250VAC;
Bandwidth /Hz/: 430MHz;
Code type: hoping code;
Number of RC (memory capacity): 24;
84.58 KB
M1 HC6 xxx 301
5
pc
| 1+ | 57.00 BGN |
| 3+ | 52.30 BGN |
| 5+ | 48.40 BGN |
| 10+ | 45.00 BGN |
| view more | |
Motor Controller RC, three channels, 433.92 MHz
Operating Voltage: 10~16VDC;
Output Current: 15A/24VDC/120VAC;
Bandwidth /Hz/: 433.92MHz;
Code type: Fixed;
Number of RC (different codes): 30;
1.73 MB
M3SAW433.92MHz LF8 xxx PT
1
pc
| 1+ | 44.40 BGN |
| 3+ | 40.70 BGN |
| 5+ | 37.60 BGN |
| 10+ | 35.00 BGN |
| view more | |
Motor Controller RC, two channels
Operating Voltage: 10~16VDC;
Output Current: 15A/24VDC/120VAC-10A/250VAC;
Bandwidth /Hz/: 430MHz;
Code type: Fixed;
Number of RC (same code): unlimited;
Number of RC (different codes): 30;
71.43 KB
5
pc
| 1+ | 45.70 BGN |
| 3+ | 42.00 BGN |
| 5+ | 38.80 BGN |
| 10+ | 36.10 BGN |
| view more | |
Motor Controller RC, two channels, 433.92 MHz
Operating Voltage: 10~16VDC;
Output Current: 15A/24VDC/120VAC;
Bandwidth /Hz/: 433.92MHz;
Code type: Fixed;
Number of RC (different codes): 30;
115.64 KB
M2 SAW433,92F8 xxx PT
4
pc
| 1+ | 45.70 BGN |
| 3+ | 42.00 BGN |
| 5+ | 38.80 BGN |
| 10+ | 36.10 BGN |
| view more | |
Motor Controller RC, two channels, 433.92 MHz, 12-30V AC/DC
Operating Voltage: 12~30VAC/VDC;
Output Current: 15A/24VDC/120VAC;
Bandwidth /Hz/: 433.92MHz;
Time Delay: 0.25sec;
Operating Distance: 50m;
Code type: Fixed;
Number of RC (same code): unlimited;
Number of RC (different codes): 31;
69.51 KB
RCV2 433 PT
3
pc
| 1+ | 46.80 BGN |
| 3+ | 42.90 BGN |
| 5+ | 39.70 BGN |
| 10+ | 36.90 BGN |
| view more | |
Motor Controller RC, two channels, 433.92 MHz, 12-30V AC/DC, hopping code
Operating Voltage: 12~30VAC/VDC;
Output Current: 15A/24VDC/120VAC;
Bandwidth /Hz/: 433.92MHz;
Time Delay: 0.25sec;
Operating Distance: 50m;
Code type: hoping code;
Number of RC (different codes): 25;
157.61 KB
RCV2 433 CH
2
pc
| 1+ | 49.70 BGN |
| 3+ | 45.60 BGN |
| 5+ | 42.10 BGN |
| 10+ | 39.20 BGN |
| view more | |
RCV2 F2 SAW433.92 HCS204
1
pc
| 1+ | 99.80 BGN |
| 3+ | 91.60 BGN |
| 5+ | 84.70 BGN |
| 10+ | 78.80 BGN |
| view more | |
Motor Controller RC, two channels, 433.92 MHz, hopping code
Operating Voltage: 10~16VDC;
Output Current: 15A/24VDC/120VAC;
Bandwidth /Hz/: 433.92MHz;
Code type: hoping code;
Number of RC (different codes): 24;
126.25 KB
M2 SAW433,92MHzHC8 xxx 301
6
pc
| 1+ | 59.20 BGN |
| 3+ | 54.30 BGN |
| 5+ | 50.20 BGN |
| 10+ | 46.70 BGN |
| view more | |
Motor Controller RC, two channels, hopping code
Operating Voltage: 10~16VDC;
Output Current: 15A/24VDC/120VAC-10A/250VAC;
Bandwidth /Hz/: 430MHz;
Code type: hoping code;
Number of RC (memory capacity): 24;
83.99 KB
M2 HC8 xxx 301
4
pc
| 1+ | 59.20 BGN |
| 3+ | 54.30 BGN |
| 5+ | 50.20 BGN |
| 10+ | 46.70 BGN |
| view more | |
Motor Controller SRL-629CH, 2RC, hopping code
Operating Voltage: 220VAC;
Power: 1000W;
Bandwidth /Hz/: 433.92MHz;
Time Delay: 1~240sec;
Operating Distance: 50m;
Code type: hoping code;
Number of RC (memory capacity): 28;
99.59 KB
SRL-629CH
2
pc
| 1+ | 123.00 BGN |
| 2+ | 115.00 BGN |
| 3+ | 108.00 BGN |
| 5+ | 101.70 BGN |
| view more | |
Motor Controller SRL-629PH, 2RC
Operating Voltage: 220VAC;
Power: 1000W;
Bandwidth /Hz/: 433.92MHz;
Time Delay: 1~240sec;
Operating Distance: 50м;
Code type: Fixed;
Number of RC (memory capacity): 42;
98.94 KB
SRL-629PH
2
pc
| 1+ | 123.00 BGN |
| 2+ | 115.00 BGN |
| 3+ | 108.00 BGN |
| 5+ | 101.70 BGN |
| view more | |
INTIEL
INT0159
3
pc
| 1+ | 310.00 BGN |
0700 18 880
Copyright 2004-2024, Panda III Co., Ltd. All rights reserverd.